ROBOTIC CAR KIT Makers Space IT Lab Punjab Government eproc.punjab.gov.pk

 RASPBERRY PI KIT Makers Space IT Lab Punjab Government eproc.punjab.gov.pk here are list of  required products. 

ROBOTIC CAR KIT
Sr.	Item(s)									Item Details / Specifications						Qty
1	Arduino UNO R3									Microcontroller ATmega328P DIP ATMEGA32u4 USB Convertor Operating Voltage         5V Input Voltage 7-12V Input Voltage (limit)         6-20V Digital I/O Pins 14 PWM Digital I/O Pins 6 Analog Input Pins         6 Flash Memory        32 KB (ATmega328P) of which 0.5 KB used by bootloader SRAM         2 KB (ATmega328P) EEPROM         1 KB Clock Speed         16 MHz LED_BUILTIN         13						1
2	Arduino Cable									USB 2.0 Cable Type A/B Shielded Heavy Duty Connect Arduino Uno or any board with the USB female A port of your computer.						1
3	Arduino UNO Case									Arduino Uno Enclosure – Clear Plastic The enclosure provides slots to access each header, USB port, power jack, the reset button,  AREF and ICSP connectors, as well as feet and vents to ensure the board gets proper cooling and slide-in wall mounting slots. All of the status LEDs on the Uno are visible through the case thanks to light pipes embedded in the design.						1
4	Li-ion Cell 18560									Frame size: 9V Block Dimensions (L x B x H mm): 26,2 x 15,2 x 48,5 Weight (g): 40.0 Electrochemical System: Nickel-Metal Hybrid Capacity: 200mAh Nominal Voltage: 8.4V Jacket: Plastic Int. Frame size to IEC: HR6F22						3
5	18650 Li-ion 3 Cell Holder									Wire ends stripped and tinned Battery Connector Dimensions: 28mm (1.1″) length x 15.8mm (0.6″) width x 6.3mm (0.24″) height Total Length: 18cm (7″) Wire Length: 15cm (5.9″)						1
6	Prototyping Board									400 Point Solderless PCB Half size Breadboard – 400 Tie Points This is a half size breadboard with 400 tie points, it is half the length of the standard size breadboard 20-29 AWG (0.3-0.8mm) wire. 55mm x 85mm x 10mm Weight: 40 grams						1
7	Bluetooth									Bluetooth HC 05 Typical -80dBm sensitivity   Up to +4dBm RF transmit power Low Power 1.8V Operation 1.8 to 3.6V I/O  PIO control UART interface with programmable baud rate With integrated antenna With edge connector						1
8	Switch									This single-pole, double-throw (SPDT) rocker switch makes a great on/off power switch. It is rated for 10 A at 125 VAC and 6 A at 250 VAC.						1
9	IN4001 Rectifier Diode				0					1N4007 Rectifier Diode Low Forward Voltage Drop High surge Current Capability						2
Page 28 of 86
10	Capcitor  4700uF										Polar  capacitor 4700uF 16V Radial						2
11	Sensor: Ultrasonic Distance				Bitmap Bitmap						HC-SR04 Working Voltage: DC  5  V Working Current: 15mA Working Frequency: 40Hz Max Range: 4m Min Range: 2cm Measuring Angle: 15  degree Trigger  Input Signal: 10uS  TTL pulse  Echo Output Signal: Input TTL signal and  the  range  in proportion Dimension: 45*20*15mm						3
12	Line  Follower  Sensor										TCRT5000  Module IR sensor  with transistor  output Operating Voltage: 5V Diode  forward  Current: 60mA Output: Analog or  digital data Transistor  collector  current: 100mA (maximum) Operating temperature: -25°C  to  +85°C						3
13	Dual Motor  Driver Module										Input Voltage: 3.2V~40Vdc Driver: L298N  Dual H Bridge  DC  Motor  Driver Power  Supply: DC  5  V –  35  V Peak  current: 2  Amps Operating current range: 0  ~  36mA Control signal input voltage  range:   Low: -0.3V ≤ Vin ≤  1.5V High: 2.3V ≤  Vin ≤  Vss Enable  signal input voltage  range: Low: -0.3  ≤  Vin ≤  1.5V (control signal is  invalid) High: 2.3V ≤  Vin ≤  Vss  (control signal active) Maximum power  consumption: 20W  (when the temperature  T =  75  °C). Storage  temperature: -25  °C  ~  +130  °C On-board  +5V regulated  Output supply (supply to  controller  board  i.e.  Arduino) Size: 3.4cm x 4.3cm x 2.7cm						1
14	Jumper  Wire: Male  to Female  strip 10  Pcs				0						10  Pcs  Pack Length: 30cm 0.1″ Female  header  contacts  on one  end,  0.1″ male  header  contacts  on other  end Standard  0.1″ (2.54mm)  spacing when placed next to  each other Wire  Colors: brown,  red,  orange,  yellow,  green, blue,  purple,  grey,  white,  black Gauge: 28  AWG (0.0126”)						1
15	Jumper  Wire: Male  to Male  Bundle 65  Pcs				0						65  Pcs  Pack Length: 25  cm x 4  Pcs 20  cm x 4  Pcs 15  cm x 8  Pcs 10  cm x 49  Pcs 0.1″ male  header  contacts  on both ends Standard  0.1″ (2.54mm)  spacing when placed next to  each other Wire  Colors: brown,  red,  orange,  yellow,  green, blue,  purple,  grey,  white,  black Gauge: 28  AWG (0.0126”)						1
16	Robot Chassis										1  x Car  Chassis 2  x Gear  Motor 2  x Car  Tire Tyre  Diameter: 6.6cm 2  x Fastener 1  x Universal Wheel 1  x 4-AAcell holder 2  x 20  slot Speed  Encoder Minimum Thickness  of car  chasis: 3mm All parts  as  showin in picture All Necessary Screws  And  Nuts						1
17	Ultrasonic  sensor Mounts										L Shaped 3mm Acrylic Mount for  Ultrasonic  distance  sensor						3
18	Nut Bolts										3mm Diameter 1  Inch Length						6
19	Component Box										Capacity: 7.9L / 267.13oz / 33.39cups Length: 323mm / 12.72in Width: 245mm / 9.65in Height: 137mm / 5.39in Hinged  clips  lock Stackable Clear  Plastic						1
No.  of Items  in  Kit																	34